Accton Technology ES4710BD Exit current web configuration, Save current running-config, Reboot

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

5.6.7.2Exit current web configuration

Users should quit the web-login by clicking “Switch maintenance” and “Exit current web configuration.”

5.6.7.3Save current running-config

Users should save the current running-config by clicking “Switch maintenance”, “Save current running-config” and “Apply”. Please refer to the CLI command 5.1.14.

5.6.7.4Reboot

Users should reboot the switch by clicking “Switch maintenance.” Please refer to the CLI command 5.1.10.

5.6.7.5Reboot with the default configuration

Users should clear all current configurations and reboot the switch again by clicking “Switch maintenance” and “Reboot with the default configuration.”

5.6.8Telnet server configuration

On the left directory of the root page, users may click “Telnet server configuration” and configure the Telnet server configuration nodes through web interface.

5.6.8.1Telnet server user configuration

Users should click “Telnet server configuration” and “Telnet server user configuration” to configure Telnet service start-up and users information. Please refer to the CLI command 5.2.2.3.3 and 5.2.2.3.5. Words and phrases are explained in the following:

149