Patton electronic 3202 manual Reboot Command, Ping Command

Model 3202 Getting Started Guide5 • Console and Telnet configuration

Reboot Command

The reboot command restarts the Model 3202. Move the cursor “ >>” to reboot in the main menu and press Enter.

----------------------------------------------------------------------

Command: reboot <CR>

Message: Please input the following information.

Do you want to reboot? (y/n): y

----------------------------------------------------------------------

Type “y” to begin the reboot process.

Ping Command

The ping command checks the connection of the Model 3202 to the network. Move the cursor “ >>” to ping in the main menu and press Enter.

The ping command sends an echo request packet to an address, and then waits for reply. The ping output can help you evaluate path-to-host reliability, delays over the path, and whether the host can be reached or is func- tioning correctly.

----------------------------------------------------------------------

Command: ping <ip> [1~65534-t] [1~1999]

Message: Please input the following information.

IP address <IP> : 10.0.0.1

Number of ping request packets to send (TAB select): -t

Data size [1~1999]: 32

----------------------------------------------------------------------

There are 3 parameters for the ping command:

•IP address: Enter the IP address that you want to ping.

•Number of ping request packed to send: Use the TAB key to select the following options.

-Default: Sends 4 packets only

-1~65534: Sets the number of ping request packets from 1 to 65534

--t :Results run continuously until you press the Ctrl key to stop the process

•Data Size: Select from 1 to 1999

Reboot Command 88