Model 3202 Getting Started Guide5 • Console and Telnet configuration
There are two UI modes for setting up the Model 3202, command and menu mode. The menu mode uses a
Move the cursor “ >>” to profile in the modify menu and press Enter.
Command: admin user modify 2 profile <name> <pass_conf>
Message: Please input the following information.
Legal user name (ENTER for default) <test>:
Input the old Access password: ****
Input the new Access password: ****
Enter the user name and set up the new access password. You must enter the new assess password twice for con- firmation.
Use the list command to view information for each user profile, including user name and UI mode.
Security
The security command menu lists commands to configure sixteen legal IP addresses for Telnet access and the Telnet port number. Move the cursor “ >>” to security in the admin menu and press Enter. The following menu displays:
>> port | Configure telnet | TCP port |
ip_pool | Legal IP address | pool |
list | Show security profile | |
Telnet TCP Port
To set up the Telnet TCP port, move the cursor “ >>” to port in the security menu and press Enter. You can select a port number from 1 to 65534. The default number is 23.
Command: admin security port <1~65534>
Message: Please input the following information.
Telnet Listening TCP Port (ENTER for default) <23>:
Legal IP Address Pool
The default legal address is 0.0.0.0. (on entry number 1). This means that there are no IP address restrictions for accessing the MOdel 3202 via Telnet. To change the legal IP address pool, move the cursor “ >>” to ip_pool in the security menu and press Enter. Select modify to set up the IP address pool.
Administration Command Menu | 90 |
