Patton electronic 3202 manual Enable Command Menu

Model 3202 Getting Started Guide 5 • Console and Telnet configuration

Enable Command Menu

The enable command menu lists commands for setting up the Model 3202. Move the cursor “ >>” to enable and press Enter. Type the supervisor password, which is root.

----------------------------------------------------------------------

Command: enable <CR>

Message: Please input the following information.

Supervisor password: ****

----------------------------------------------------------------------

In the enable sub menu, you can set up management features and upgrade software, back up the system config- uration and restore the system configuration via utility tools.

To save your changes, you must write the new configuration to NVRAM and reboot the Model 3202 to work with the new settings.

When you first log in to the Model 3202 with the supervisor password, the main menu displays:

>> enable	Modify command privilege
setup	Configure system
status	Show running system status
show	View system configuration
write	Update flash configuration
reboot	Reset and boot system
ping	Packet internet groper command
admin	Setup management features
utility	TFTP upgrade utility
exit	Quit system

Table 17 explains the commands available in the main menu:

	Table 17. Enable Command Menu
Command	Description
enable	Change the configuration and write changes to nonvolatile RAM (NVRAM).
setup	Initially configure the Model 3202.
status	View the status of the Model 3202
show	Show the system and configuration
write	Update flash configuration. After you have completed all desired changes, make sure to
	write the new configuration to NVRAM. Use the write command to save your changes
	and reboot the system or all of your changes will not take effect.
reboot	Reset and reboot system. After you have completed all desired changes, make sure to write
	the new configuration to NVRAM. Use the reboot command to restart the system or all of
	your changes will not take effect.
ping	Check the connection to the Model 3202
admin	Set up advanced management features
utility	Upgrade software and backup/restore the current configuration
exit	Log out of the system

Enable Command Menu 71