Patton electronic 3202 manual Window structure, Console/Telnet Menu

Model 3202 Getting Started Guide 5 • Console and Telnet configuration

The Model 3202 uses a menu-driven interface for serial console and Telnet management. This interface dis- plays all available commands for configuring the modem.

The following figure shows an example of the menu-driven interface. In the menu, scroll up/down by pressing the I / K keys. Select one command by pressing the L key. Go back to a higher level of the menu by pressing the J key. You can also scroll to the top/bottom with the U/O keys.

For example, to show the system information, log on to the Model 3202. Press the K key twice and select the show command with the L key. Select the system command in the submenu. The system will display general information. You may also use the Enter key to select a command.

Figure 46. Console/Telnet Menu

Window structure

From top to bottom, the window is divided into four parts:

•Product name: G.SHDSL EFM Bridge

•Menu field: The menu tree prompts on this field. Symbol “>>” indicates the cursor place.

•Configuration field: Configure the parameters in this field. < parameter > indicates the parameters you can choose and < more…> indicates that there are more options in the submenu.

•Footer: Operation commands for help

Introduction 68