Patton electronic 3202 manual Advanced Configuration Options, Line Type, Annex Type

Model 3202 Getting Started Guide 4 • Web configuration

Advanced Configuration Options

This section contains information for setting up advanced options for the Model 3202 via the WMI. Advanced setup contains Model 3202 EFM, VLAN, QoS and Rate Control parameters.

Note The advanced functions are only for advanced users to setup advanced functions. The incorrect advanced settings will affect the performance of the Model 3202 or cause system errors and isconnec- tion.

LINE

Click on LINE under Advanced on the main menu to reach the LINE advanced configuration page. You can setup the Line Type (number of wires), Annex Type, TCPAM Type, Main Rate, SNR Margin, and Line Probe settings for LINE parameters.

Figure 13. LINE page

Line Type

Select the line type for your model from the Link drop-down list. Line type means how many wires you want to use on the DSL connection. For example, you can select 2-wire, 4-wire or 8-wire line type for the 8-wire model.

Model

Type

Table 7. Line Type Chart

		Line Type
	2-wire	4-wire	8-wire
2-wire model
	•
4-wire model	•	•
8-wire model	•	•	•

Annex Type

Select the appropriate Annex type from the drop-down list. Annex AF describes the transmission and perfor- mance requirements for North America. Annex BG describes performance and transmission requirements for Europe.

Advanced Configuration Options 39