Force10 Networks S2410s manual Copy clibanner, Copy systemrunning-config nvramstartup-config

copy (clibanner)

Parameters

Default

Mode

Command History

Related Commands

Example

The following command copies from the switch system memory to flash memory:

copy system:running-config nvram:startup-config

Note: This command creates a text-based startup-config file.

tftp_server_ip_address Enter the URL of the TFTP server in IPv4 address format:

	xxx.xxx.xxx.xxx
path/filename	Enter the path on the TFTP server and the filename. If the file resides
	in the root directory, then you can simply enter the filename. The path
	and filename can be no more than 31 characters each. The file size
	cannot be larger than 2K.

None

Privileged Exec

Version 2.3	Modified: Modified functionality of copy system:running-config
	nvram:startup-config and copy tftp //tftp_server_ip_address/
	path/filename nvram:startup-config.
copy (clibanner)		Downloads the CLI banner text file to the switch.
write		Saves the running configuration to NVRAM, duplicating the functionality of
		copy system:running-config nvram:startup-config
Force10 S50 #copy nvram:errorlog tftp://10.10.10.10/errorLog
Mode		TFTP
Set TFTP Server IP		............................. 10.10.10.10
TFTP Path		errorLog
TFTP Filename
Data Type		Error Log

Management access will be blocked for the duration of the transfer Are you sure you want to start? (y/n) y

File transfer operation completed successfully.

Figure 35 Using the copy command to Upload the Event Log

copy (clibanner)

This version of the copy command, with the “clibanner” option, downloads the CLI banner text file to the switch. Local URLs can be specified using tftp or xmodem. The CLI banner is configurable text that you can have displayed when the CLI user logs in to the switch. The file

SFTOS Command Reference for the S2410, Version 2.4.1.0 141