Force10 Networks S2410s manual Dot1x system-auth-control, Dot1x timeout, Switch

dot1x system-auth-control

Command
	Version 2.3	Interface Range mode added
History
Related
	interface range	Defines an interface range and accesses the Interface Range mode
Commands

dot1x system-auth-control

	This command is used to enable the dot1x authentication support on the switch. By default,
	the authentication support is disabled. While disabled, the dot1x configuration is retained and
	can be changed, but is not activated.
	The no version of this command is used to disable the dot1x authentication support on the
	switch.
Syntax	dot1x system-auth-control
Default	disabled
Mode	Global Config

dot1x timeout

	This command sets the value, in seconds, of the timer used by the authenticator state machine
	on this port. Depending on the keyword used and the value (in seconds) passed, various
	timeout configurable parameters are set.
Syntax	dot1x timeout {{reauth-period seconds} {quiet-period seconds} {tx-period
	seconds} {supp-timeout seconds} {server-timeout seconds}}
	The no version of this command sets the value, in seconds, of the specified timer to the its
	default value:
	no dot1x timeout {reauth-period quiet-period tx-period supp-timeout
	server-timeout}
Parameters	reauth-period—Sets the value, in seconds, of the timer used by the authenticator state machine on this
	port to determine when re-authentication of the supplicant takes place. The reauth-period must be a
	value in the range 1 - 65535.
	quiet-period—Sets the value, in seconds, of the timer used by the authenticator state machine on this
	port to define periods of time in which it will not attempt to acquire a supplicant. The quiet-period must
	be a value in the range 0 - 65535.

174 Security Commands