Force10 Networks S2410s Dot1x re-authenticate, Dot1x re-authentication, Unauthorized, Authorized

dot1x re-authenticate

	Force-unauthorized—The authenticator PAE unconditionally sets the controlled port to
	unauthorized.
	Force-authorized—The authenticator PAE unconditionally sets the controlled port to
	authorized.
	Auto—The authenticator PAE sets the controlled port mode to reflect the outcome of the
	authentication exchanges between the supplicant, authenticator and the authentication server.
Syntax	dot1x port-control all {force-unauthorized force-authorized auto}
	no dot1x port-control all sets the authentication mode to be used on all ports to auto.
Default	auto
Mode	Global Config

dot1x re-authenticate

Syntax

Mode

Command History

This command begins the re-authentication sequence on the specified port. This command is only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be returned.

dot1x re-authenticate unit/slot/port

Global Config

Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.

dot1x re-authentication

	This command enables re-authentication of the supplicant for the specified port.
	The no version of this command disables re-authentication of the supplicant for the specified
	port.
Syntax	dot1x re-authentication
Default	disabled
Mode	Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)#
	prompt, such as (conf-if-range-vlan 10-20)#.

SFTOS Command Reference for the S2410, Version 2.4.1.0 173