Force10 Networks S2410s manual Radius accounting mode, Radius server host

radius accounting mode

radius accounting mode

	This command is used to enable the RADIUS accounting function.
	The no version of this command is used to set the RADIUS accounting function to the default
	value - i.e. the RADIUS accounting function is disabled.
Syntax	radius accounting mode
Default	disabled
Mode	Global Config

radius server host

	Configure the RADIUS authentication and accounting server connections.
Syntax	radius server host {auth acct} ipaddr [port]
	no radius server host {auth acct} ipaddr

Parameters	auth	Use this keyword if you want to configure a connection to a RADIUS
		authentication server. See Usage, below.
	acct	Use this keyword if you want to configure a connection to a RADIUS
		accounting server. See Usage, below.
	ip-addr	Enter the IP address, in dotted decimal format, of the server host.
	port	(Optional) Configure the UDP port number to use to connect to the configured
		RADIUS server. See Usage, below.

Usage If the auth keyword is used, the command configures the IP address to use to connect to a RADIUS authentication server. Up to 3 servers can be configured per RADIUS client. If the maximum number of configured servers is reached, the command will fail until one of the servers is removed by executing the no form of the command.

If the optional port parameter is used with the auth keyword, the command will configure the UDP port number to use to connect to the configured RADIUS authentication server. In order to configure the UDP port number, the IP address must match that of a previously configured RADIUS authentication server. The port number must lie between 1 - 65535, with 1812 being the default value.

SFTOS Command Reference for the S2410, Version 2.4.1.0 181