Force10 Networks S2410s manual Show sntp server, For each configured server, Sntp Commands

show sntp server

show sntp server

	This command is used to display SNTP server settings and configured servers.
Syntax	show sntp server
Mode	Privileged Exec
Example

Force10# show sntp server
Server IP Address:	unknown
Server Type:
Server Stratum:	0
Server Reference Id:	Reserved
Server Mode:
Server Maximum Entries:	3
Server Current Entries:	0

No SNTP Servers exist.

Force10#

Figure 49 show sntp server Command Example

Field Server IP Address—IP address of configured SNTP server

Descriptions

Server Type—Address type of server

Server Stratum—Claimed stratum of the server for the last received valid packet

Server Reference ID—Reference clock identifier of the server for the last received valid packet Server Mode—SNTP server mode

Server Max Entries—Total number of SNTP Servers allowed

Server Current Entries—Total number of SNTP configured

For each configured server:

IP Address—IP Address of configured SNTP Server

Address Type—Address Type of configured SNTP server

Priority—IP priority type of the configured server

Version—SNTP version number of the server. The protocol version used to query the server in unicast mode

Port—Server port number

Last Attempt Time—Last server attempt time for the specified server

Last Attempt Status—Last server attempt status for the server

Total Unicast Requests—Number of requests to the server

Failed Unicast Requests—Number of failed requests from server

220 SNTP Commands