Force10 Networks S2410s Radius server msgauth, Radius server primary, Radius server retransmit

radius server msgauth

radius server msgauth

	This command enables the message authenticator attribute for a specified server.
Syntax	radius server msgauth ipaddr
Mode	Global Config

radius server primary

	This command is used to configure the primary RADIUS authentication server for this
	RADIUS client. The primary server is the one that is used by default for handling RADIUS
	requests. The remaining configured servers are only used if the primary server cannot be
	reached. A maximum of three servers can be configured on each client. Only one of these
	servers can be configured as the primary. If a primary server is already configured prior to this
	command being executed, the server specified by the IP address specified used in this
	command will become the new primary server. The IP address must match that of a
	previously configured RADIUS authentication server.
Syntax	radius server primary ipaddr
Mode	Global Config

radius server retransmit

	This command sets the maximum number of times a request packet is re-transmitted when no
	response is received from the RADIUS server. The retries value is an integer in the range of 1
	to 15.
	The no version of this command sets the maximum number of times a request packet is
	re-transmitted, when no response is received from the RADIUS server, to the default value,
	i.e. 10.
Syntax	radius server retransmit retries
	no radius server retransmit
Default	10
Mode	Global Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 183