Compaq DL585 G2 manual Base Configuration, Configuration Information Factory Integrated Models

QuickSpecs

HP ProLiant DL585 Generation 2 (G2)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.

NOTE: FIO indicates that this option only available as a Factory Installable Option.

Step 1: Base Configuration

ModelsHP ProLiant DL585 G2 Rack CTO Chassis418633-B21

Factory Integrated Models ship with:

Two embedded NC371i Multifunction Gigabit Network Adapters

Integrated Lights-Out 2 (iLO 2) Standard management

Six (6) Redundant Hot Plug Fans

One Hot Plug Power Supply

Rack 4U Form Factor

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Processors	AMD Opteron™ 8224SE 3.2 GHz-1 MB Dual-Core Processor (120W) 2P Option Kit		458932-L21
	NOTE: If four processors are desired, select one 458932-L21 and one 458932-B21.
	AMD Opteron™ 8222 3.0 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit		458933-L21
	NOTE: If four processors are desired, select one 458933-L21 and one 458933-B21.
	AMD Opteron™ 8222SE 3.0 GHz-1 MB Dual-Core Processor (120W) 2P Option Kit		448184-L21
	NOTE: If four processors are desired, select one 448184-L21 and one 448184-B21.
	AMD Opteron™ 8220 2.8 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit		439728-L21
	NOTE: If four processors are desired, select one 439728-L21 and one 439728-B21.
	AMD Opteron™ 8218 2.6 GHz-1 MB Dual-Core Processor 2P Option Kit		413933-L21
	NOTE: If four processors are desired, select one 413933-L21 and one 413933-B21.
	AMD Opteron™ 8216 2.4 GHz-1 MB Dual-Core Processor 2P Option Kit		413932-L21
	NOTE: If four processors are desired, select one 413932-L21 and one 413932-B21.
	AMD Opteron™ 8214 2.2 GHz-1 MB Dual-Core Processor 2P Option Kit		416734-L21
	NOTE: If four processors are desired, select one 416734-L21 and one 416734-B21.
Base Memory	1	GB REG PC2-5300 2 x 512 MB Single Rank Kit	408850-B21
	2	GB REG PC2-5300 2 x 1 GB Single Rank Kit	408851-B21
	4	GB REG PC2-5300 2 x 2 GB Dual Rank Kit	408853-B21
	8	GB REG PC2-5300 2 x 4 GB Dual Rank Kit	408854-B21

NOTE: Memory must be ordered in like-pairs, i.e. two of the same size.

NOTE: If all four banks on a memory node are populated, the maximum memory clock speed will be 533 MHz. If two or fewer banks on a memory node are populated, the maximum memory clock speed will be 667 MHz.

DA - 12575 Canada — Version 37 — May 28, 2008 Page 18