Force10 Networks S2410s manual Show logging, Show mac-addr-table

show logging

Usage Information

Example

The following example shows sample output of the show interfaces description command with an interface specified in the unit/slot/port form:

Force10#show interfaces description 1/0/1

Interface		1/0/1
IfIndex		1
Description		1/0/1 is access port
MAC	Address	00:01:E8:D5:BA:C0
Bit	Offset Val..1

Figure 12 Output of the show interfaces description Command

Related
	description	User-entered description of the selected interface
Commands
	show interfaces cos-queue	The class-of-service queue configuration for the specified interface
	show port	The configuration and status of the specified interface or of all
		interfaces
	show port-channel	The configuration and status of the specified LAG or of all LAGs

show logging

Related Commands

Note: See the various versions of the show logging command in the Syslog chapter (System Log on page 149).

show logging	Displays a combination of the system log and event log (buffered log).
show logging buffered	Displays buffered logging (the System log)
show logging hosts	Displays configured logging hosts (syslog servers.
show logging traplogs	Displays trap summaries (number of traps since last reset and last
	view) and trap details.

show mac-addr-table

This command displays the forwarding database entries. If the command is entered with no parameter, the entire table is displayed. the same as entering the optional all parameter. Alternatively, you can enter a MAC address to display the table entry for that address and all entries following it.

Syntax show mac-addr-table [macaddr all] [interface unit/slot/port vlan VLAN_ID count]

78 System Management Commands