Force10 Networks S2410s manual Makestatic, Syntax makestatic, System Configuration Commands

makestatic

Usage Information

Example

After using this command to access the Interface VLAN mode (the prompt for the Interface VLAN mode is (conf-if-vl-<vlan-id>)#), you can configure the selected VLAN.

You can also make configuration changes to a VLAN in the Interface Range mode (see interface range on page 108) and the Interface Config mode (see interface on page 108). For details on modes, see Chapter 3, Using the Command Line Interface, on page 39.

Force10 #config

Force10 (Config)#interface vlan 5

Force10 (Conf-if-vl-5)#?

description		Add Description to the interface
encapsulation		Configure interface link layer encapsulation type.
exit		To exit from the mode.
help		Display help for various special keys.
igmp		Configure IGMP Snooping parameters for the Vlan
ip		Configure IP parameters.
mtu		Sets the default MTU size.
protocol		Configure the Protocols associated with particular
makestatic		Group Ids.
		Change the VLAN type from 'Dynamic' to 'Static'.
name		Configure an optional VLAN Name.
participation		Configure how ports participate in a specific VLAN.
priority		Configure the priority for untagged frames.
pvid		Configure the VLAN id for a specific port.
tagged		Configure tagging for a specific VLAN port.
untagged		Configure untagging for a specific VLAN port.
Force10 (Conf-if-vl-5)#exit
Force10 (Config)#exit
Force10 #show vlan brief		MAC Aging	IP Address
VLAN ID VLAN Name
------- -------------------------------- -------------			--------------------
1	Default	300	unassigned
5		300	unassigned

Force10#

Figure 30 Using the interface vlan Command

Related	interface	Accesses the Interface Config mode for a designated logical or physical
Commands		interface.
	interface range	Groups a set of individual interfaces, a range of interfaces, or more than one
		range of interfaces, to which subsequent configuration commands can be
		applied (bulk configuration)
	show vlan	Displays information about VLANs, either detailed information for a specific
		VLAN or summary information for all configured VLANs.
	show port	Displays port information for a selected port or for all ports

makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-3965.

Syntax makestatic 2-3965

124 System Configuration Commands