Force10 Networks S2410s manual Igmp mcrtexpiretime interface, Mode and Interface Vlan mode

igmp mcrtexpiretime (interface)

Syntax

Default

Mode

Command History

Related Commands

igmp maxresponse 1-3599

The variable must be less than the IGMP query interval time value. The range is 1 to 3599 seconds.

The no igmp maxresponse command sets the IGMP Maximum Response time on the interface to the default value.

10 seconds

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#; Interface VLAN.

Version 2.3	Modified: Revised from set igmp maxresponse. Added Interface Range mode
	and Interface VLAN mode.
igmp enable (interface)		Enables IGMP Snooping on a selected interface.
interface range		Defines an interface range and accesses the Interface Range mode
interface		Identifies an interface and enters the Interface Config mode.
interface vlan		Identifies a VLAN and enters the Interface VLAN mode.
set igmp maxresponse		Sets the IGMP maximum response time globally.
(global)
show igmpsnooping		Displays IGMP Snooping status information.

igmp mcrtexpiretime (interface)

Syntax

Default

Mode

Command History

This command sets the Multicast router present expiration time on a particular interface.

[no] igmp mcrtexpiretime 0-3600

The variable is the amount of time in seconds that a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.

The no igmp mcrtexpiretime command sets the Multicast Router Present Expiration time on the interface to 0. A value of 0 indicates an infinite timeout, i.e. no expiration.

0

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#; Interface VLAN.

Version 2.3 Modified: Revised from set igmp mcrtexpiretime. Added Interface Range

mode and Interface VLAN mode.

SFTOS Command Reference for the S2410, Version 2.4.1.0 239