Force10 Networks S2410s manual Set gmrp interfacemode all, Show gmrp configuration

set gmrp interfacemode

set gmrp interfacemode

	This command enables GARP Multicast Registration Protocol on a selected interface. If an
	interface which has GARP enabled is enabled for routing or is enlisted as a member of a
	port-channel (LAG), GARP functionality will be disabled on that interface. GARP
	functionality will subsequently be re-enabled if routing is disabled and port-channel (LAG)
	membership is removed from an interface that has GARP enabled.
Default	disabled
Syntax	set gmrp interfacemode
	Use no set gmrp interfacemode to disable GARP Multicast Registration Protocol on a
	selected interface. If an interface that has GARP enabled is enabled for routing or is enlisted
	as a member of a port-channel (LAG), GARP functionality will be disabled on that interface.
	GARP functionality will subsequently be re-enabled if routing is disabled and port-channel
	(LAG) membership is removed from an interface that has GARP enabled.
Mode	Interface Config

set gmrp interfacemode all

Command
	Version 2.3	Changed to gmrp interfacemode all.
History

show gmrp configuration

	This command displays Generic Attributes Registration Protocol (GARP) information for
	one or all interfaces.
Syntax	show gmrp configuration {unit/slot/port all}
Mode	Privileged Exec and User Exec
	Interface—This displays the unit/slot/port of the interface that is described in this row of the
	table.
	Join Timer—Specifies the interval between the transmission of GARP PDUs registering (or
	re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is
	an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100
	centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest
	granularity of specification is 1 centisecond (0.01 seconds).

SFTOS Command Reference for the S2410, Version 2.4.1.0 233