Force10 Networks S2410s Commands Available in Ethernet Range Mode, System Configuration Commands

interface range

Range and Port Channel Range prompts within that mode are displayed in the Link Aggregation chapter (LAGs) in the SFTOS Command Reference.

Example

(s50-1) (conf-if-range-et-1/0/10-1/0/11)#?

addport	Add this port to a port-channel.
auto-negotiate	Enables/Disables automatic negotiation on a port.
classofservice	Configure Class of Service parameters.
cos-queue	Configure the Cos Queue Parameters.
deleteport	Delete this port from a port-channel.
description	Add Description to the interface
dot1x	Configure Dot1x interface commands.
exit	To exit from the mode.
gmrp	Set GARP Multicast Registration Protocol parameters.
gvrp	Set GARP VLAN Registration Protocol parameters.
igmp	Enable/Disable IGMP Snooping on a selected interface
ip	Configure IP parameters.
mac	Configure MAC Access List group parameters.
mode	Configure the double VLAN tunnel mode for this interface.
mtu	Sets the default MTU size.
port	Configure a physical port.
port-channel	Enable/Disable the port-channel's administrative mode.
port-security	Enable/Disable Port MAC Locking/Security for interface.
protocol	Configure the Protocol Based VLAN parameters.
service-policy	Configure DiffServ Service.
--More-- or (q)uit	Configure switch options and settings.
set
shutdown	Enable/Disable a port.
snmp	Configure SNMP options.
snmp-server	Enable/Disable SNMP violation traps interface.
spanning-tree	Set the spanning tree operational mode.
speed	Sets the speed and duplex setting for the interface.
traffic-shape	Configure the maximum transmission bandwidth limit.
vlan	Configure VLAN parameters.
(s50-1) (conf-if-range-et-1/0/10-1/0/11)#mode ?
dvlan-tunnel	Configure double VLAN tunneling for a specific port.
dot1q-tunnel	Configure double VLAN tunneling for a specific port.

(s50-1) (conf-if-range-et-1/0/10-1/0/11)#mode dvlan-tunnel ?

<cr> Press Enter to execute the command.

(s50-1) (conf-if-range-et-1/0/10-1/0/11)#mode dvlan-tunnel

(s50-1) (conf-if-range-et-1/0/10-1/0/11)#vlan ?

acceptframe	Configure how to handle	tagged/untagged frames
ingressfilter	received.
	Enable/Disable application of Ingress Filtering Rules.
participation	Configure how ports participate in a specific VLAN.
priority	Configure the priority for untagged frames.
pvid	Configure the VLAN id for a specific port.
tagging	Configure tagging for a	specific VLAN port.
untagging	Configure untagging for	a specific VLAN port.

Figure 21 Commands Available in Ethernet Range Mode

SFTOS, in contrast to FTOS, does not allow spaces around commas or hyphens in the range statement. The following example shows an incorrect range statement, followed by the associated error message.

110 System Configuration Commands