Force10 Networks S2410s manual Dot1x initialize, Dot1x login, Dot1x max-req

dot1x initialize

Syntax	dot1x defaultlogin listname
Mode	Global Config

dot1x initialize

Syntax

Mode

Command History

This command begins the initialization sequence on the specified port. This command is only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be returned.

dot1x initialize unit/slot/port

Global Config

Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.

dot1x login

	This command assigns the specified authentication login list to the specified user for 802.1x
	port security. The user parameter must be a configured user and the listname parameter must
	be a configured authentication login list.
Syntax	dot1x login user listname
Mode	Global Config

dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.

Syntax dot1x max-req count

The count value must be in the range 1 - 10.

The no version of this command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.

SFTOS Command Reference for the S2410, Version 2.4.1.0 171