Force10 Networks S2410s manual Show interface ethernet, Unit/slot/port, 3965

		show interface ethernet
Related
	ip address (management)	Configures the IP address of the management interface.
Commands
	show interface ethernet	Displays detailed statistics for a specific port or for all CPU traffic
		based upon the argument.
	show interface switchport	Displays a summary of statistics on Layer 2 interfaces.
	show interface	Displays information about the management interface to the switch.
	managementethernet

show interface ethernet

Syntax

Parameters

Mode

Usage Information

This command displays detailed statistics for a specific port or for all CPU traffic based upon the argument.

show interface ethernet {switchport unit/slot/port 1-3965}

switchport	The display parameters for when switchport is entered, are shown
	below the list for unit/slot/port.
unit/slot/port	Valid unit, slot and, port number, separated by forward slashes. The
	,
	display parameters are shown below.
1-3965	VLAN ID

Privileged Exec

This command displays distinctly different reports, depending on the entered parameter.

Figure 10 on page 68 shows an example of the show interface ethernet report when the keyword switchport is added. Table 7 on page 68 contains an explanation of the report fields.

Figure 11 shows an example of the show interface ethernet report when the argument is unit/slot/port. Table 8 contains an explanation of the report fields.

SFTOS Command Reference for the S2410, Version 2.4.1.0 67