Force10 Networks S2410s manual Port-security mac-address move, Show port-security

port-security mac-address move

Mode

Command

History

Related

Commands

no port-security mac-address mac-address vid

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Added Interface Range mode.
interface range	Defines an interface range and accesses the Interface Range mode

port-security mac-address move

Syntax

Mode

Command

History

Related

Commands

This command converts dynamically locked MAC addresses to statically locked addresses.

port-security mac-address move

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Added Interface Range mode.
interface range	Defines an interface range and accesses the Interface Range mode

show port-security

	This command displays the port-security settings for a particular interface or for the entire
	system.
Syntax	show port-security [unit/slot/port all]
Mode	Privileged Exec
	When no parameter is entered, the one report field is:
	Port Security Administration Mode—Port-locking mode for the entire system
	When either the unit/slot/port or all parameter is entered, the report fields are:
	Intf — Port number (unit/slot/port)
	Interface Admin Mode — Port-locking mode for the Interface
	Dynamic Limit—Maximum dynamically allocated MAC Addresses
	Static Limit—Maximum statically allocated MAC Addresses
	Violation Trap Mode—Whether violation traps are enabled
166	Security Commands