Force10 Networks S2410s manual Radius server key, Authentication server, Security Commands

radius server key

Mode

Related Commands

If the acct keyword is used, the command configures the IP address to use for the RADIUS accounting server. Only a single accounting server can be configured. If an accounting server is currently configured, it must be removed from the configuration using the no form of the command before this command succeeds. If the optional port parameter is used, the command will configure the UDP port to use to connect to the RADIUS accounting server. The IP address specified must match that of a previously configured accounting server. If a port is already configured for the accounting server, then the new port will replace the previously configured value. The port must be a value in the range 1 - 65535, with 1813 being the default value.

The no version of this command is used to remove the configured RADIUS authentication server or the RADIUS accounting server. If the auth keyword is used, the previously configured RADIUS authentication server is removed from the configuration. Similarly, if the acct keyword is used, the previously configured RADIUS accounting server is removed from the configuration. The ipaddr parameter must match the IP address of the previously configured RADIUS authentication / accounting server.

Global Config

authentication login	Define an authentication login list.
show radius	Display RADIUS servers.
users defaultlogin	Assign the authentication login list to use for non-configured users when
	attempting to log in to the system.

radius server key

	Configure the shared secret between the RADIUS client and the RADIUS accounting /
	authentication server.
Syntax	radius server key {auth acct} ipaddr
	Depending on whether the auth or acct keyword is used, the shared secret will be configured
	for the RADIUS authentication or RADIUS accounting server. The IP address provided must
	match a previously configured server. When this command is executed, the secret will be
	prompted. The secret must be an alphanumeric value not exceeding 20 characters.
Mode	Global Config

182 Security Commands