Force10 Networks S2410s manual Interface managementethernet, Ip address management

interface managementethernet

interface managementethernet

Syntax

Mode

Command History

Usage Information

This command invokes the Interface ManagementEthernet mode (uses

the(Config-if-ma)#prompt), where you can set up a management IP interface. For details on management interfaces, see the Management chapter of the SFTOS Configuration Guide.

interface managementethernet

Global Config

Version 2.3 Introduced

This command provides access to the following network configuration command groups:

Related Commands

Table 4 Interface ManagementEthernet Mode Command Families

ip	Configure network parameters of the switch.
mac-address	Configure MAC Address.
mac-type	Select the locally administered or burnedin MAC address.
vlan	Configure the Management VLAN ID of the switch.
protocol	Select DHCP, BootP, or None as the network config protocol

ip address (management)	Configures the IP address of the management interface.
mac-address	Configure the MAC address of the management interface.
mac-type	Configure the MAC type of the management interface.
management route default	Set the IP gateway of the switch
protocol	Set the network protocol of the management interface.
show interface	Display a summary of statistics for a specific port, including the
	management port, or a count of all CPU traffic based upon the
	argument.
ip http server enable	Enable access to the switch through the Web User Interface
	(Web UI) of SFTOS.
vlan participation (management)	Set the VLAN ID of the management interface.

ip address (management)

This command configures the IP address of the management interface.

Syntax ip address ipaddr subnetmask

58 System Management Commands