Alcatel-Lucent 6600 manual Power Supply Redundancy, OS6602-BPS Backup Power Supply Specifications

OmniSwitch 6600 Family Chassis and Hardware ComponentsBackup Power Supply

OS6602-BPS Backup Power Supply Specifications

Input Voltage	85 to 150 VAC
Input Frequency	47 to 63 Hz
Efficiency	75% measured at 115 VAC
Temperature	Operating: 0 to +50 Celsius
	Non-Operating: - 40 to +85 Celsius
Relative Humidity	5% to 90% Relative Humidity (Operating)
	0% to 95% Relative Humidity (Storage)
Altitude	10,000 feet @ +32 Celsius
OS6602-BPS-DC Backup Power Supply Specifications
Input Voltage	36 to 72 VAC
Input Frequency	N/A
Efficiency	75% measured at 115 VAC
Temperature	Operating: 0 to +50 Celsius
	Non-Operating: - 20 to +85 Celsius
Relative Humidity	5% to 90% Relative Humidity (Operating)
	0% to 95% Relative Humidity (Storage)
Altitude	10,000 feet @ +32 Celsius
OS6600-BPS-P PoE Backup Power Supply Specifications
Width	15.50 inches, approx.
Height	2.61 inches, approx.
Height (rack units)	1.5 RU
Depth	4.53 inches, approx.
Ambient Temperature	0 to +70 deg C, operating;
	-40 to +85 deg C, non-operating
Humidity	5% to 90% Relative Humidity (Operating)
	0% to 95% Relative Humidity (Storage)
Altitude	10000 feet at +32 deg C, operating; 50000 feet, non-operating

Power Supply Redundancy

After a backup power supply is installed, the primary (factory-installed) power supply continues to take on the full power load for switch operations. Meanwhile, the backup power supply operates in active standby mode. If the primary power supply fails unexpectedly, the backup power supply automatically takes up the full power load without disrupting the switch.

OmniSwitch 6600 Family Hardware Users Guide September 2006 page 2-29