
Contents
| Viewing Fan Status for Stacked Configurations | |
| A Slot Number is Specified | 2- 56 |
| No Slot Number is Specified | 2- 57 |
| Chassis Airflow | |
| Blank Cover Panels | 2- 59 |
| Pinouts | |
| Console Port | |
| Serial Connection Default Settings | |
| Modifying the Serial Connection Settings | |
| Configuring | |
| Viewing Basic Chassis Information | |
| Hardware Information | |
| Slot and Component Information | |
| Detailed Slot and Component Information | |
| Basic Primary Slot and Component Information | |
| Basic Chassis Information | |
| ||
| Managing MAC Addresses on the Switch | |
| MAC Range Guidelines | |
| OmniSwitch 6600 Family MAC Range Specifications | |
| Base Chassis MAC Address as Unique Identifier | |
| Determining Current MAC Address Allocation on the Switch | |
| Base Chassis MAC Address in Stacked Configurations | |
Chapter 3 | Installing and Managing Power over Ethernet (PoE) | |
| In This Chapter | |
| Power over Ethernet Specifications | |
| Viewing | |
| Configuring Power over Ethernet Parameters | |
| Power over Ethernet Defaults | |
| Understanding and Modifying the Default Settings | |
| Setting the PoE Operational Status | 3- 5 |
| Configuring the Total Power Allocated to a Port | 3- 6 |
| Configuring the Total Power Allocated to a Switch | 3- 6 |
| Setting Port Priority Levels | 3- 7 |
| Setting the Capacitor Detection Method | 3- 8 |
| Understanding Priority Disconnect | |
| Setting Priority Disconnect Status | |
| Disabling Priority Disconnect | 3- 9 |
| Enabling Priority Disconnect | 3- 9 |
| Priority Disconnect is Enabled; Same Priority Level on All PD Ports | 3- 10 |
| Priority Disconnect is Enabled; Incoming PD Port has Highest |
|
| Priority Level | 3- 10 |
| Priority Disconnect is Enabled; Incoming PD Port has Lowest |
|
| Priority Level | 3- 10 |
| Priority Disconnect is Disabled | 3- 11 |
| Monitoring Power over Ethernet via the CLI |
OmniSwitch 6600 Family Hardware Users Guide September 2006 | v |