Installing SFPs OS6600-U24, Inserting the SFP | Alcatel-Lucent

OmniSwitch 6600 Family Chassis and Hardware Components	Installing SFPs (OS6600-U24)

Installing SFPs (OS6600-U24)

OmniSwitch 6600-U24 switches support upto twenty-four 100 Mbps Small Form Pluggable (SFP) modules. These SFPs are packaged separately and therefore are not factory-installed. You can install the SFP(s) by following the steps below:

Anti-Static Warning. Before handling any component, free yourself of static by wearing a grounding strap, or by grounding yourself properly. Static discharge can damage the SFP, as well as the switch and uplink module.

1Align the transceiver with the transceiver slot on the OS6600-U24 as shown.

Inserting the SFP

Note. The SFP should slide in easily. Do not force the SFP into the slot. Otherwise you can damage the connectors. If any resistance is encountered, ensure the SFP is aligned and oriented properly, as shown in the diagram above.

2Holding the SFP by its sides, carefully slide it into the desired SFP slot (ports 1–24) until it clicks into place; this is an indication that the connectors are firmly seated.

OmniSwitch 6600 Family Hardware Users Guide September 2006

page 2-51

Image 75

Alcatel-Lucent manual Installing SFPs OS6600-U24, Inserting the SFP

Contents

OmniSwitch 6600 Family Hardware Users Guide OmniSwitch 6600 Family Hardware Users Guide September Contents Temperature Errors Viewing Fan Status Priority Disconnect is Enabled Incoming PD Port has Highest CLI Commands Supported on Both the Primary and Secondary Index-1 Page Supported Platforms About This Guide Unsupported Platforms Who Should Read this Manual? When Should I Read this Manual?What is in this Manual? What is Not in this Manual? Documentation Roadmap Stage 1 Using the Switch for the First TimeStage 2 Gaining Familiarity with Basic Switch Functions How is the Information Organized? Anytime Stage 3 Integrating the Switch Into a Network Related Documentation OmniSwitch 6600 Family Getting Started Guide Technical Support Page OmniSwitch 6600 Family Stand-Alone and Stacked Configurations Stacked ConfigurationsStand-Alone Smart Continuous Switching Availability Features Hot Swapping Software Rollback User-Driven Monitoring Hardware MonitoringAutomatic Monitoring LEDs Single Office Building with 1000 Users Application Examples OmniPCX Medium Campus with 1500 UsersPage OmniSwitch 6600 Family Chassis and Hardware Components OmniSwitch 6624 Front Panel OmniSwitch 10/100 Ethernet Port Specifications OS6624 Specifications OmniSwitch 6600-U24 Console Port Gigabit Ethernet Uplink Module Slot OmniSwitch 6600-U24 Front Panel OS6600-U24 Specifications SFP Mbps Ethernet SFP Port Specifications OmniSwitch 6600-P24 OmniSwitch 6600-P24 OmniSwitch 6600-P24 Front Panel OS6600-P24 Specifications 10/100 Power over Ethernet PoE Port Specifications TM OmniSwitch OmniSwitch 6648 Front Panel OS6648 Specifications OmniSwitch 6602-24 Front Panel OS6602-24 Specifications 10/100 Ethernet Ports Console Port OmniSwitch 6602-48 Front Panel OS6602-48 Specifications Front Panel LED Descriptions OS6648 Shown Status LEDs OmniSwitch 6600 Family Chassis and Hardware Components PoE Power Connector OmniSwitch 6600 Family Rear PanelRedundant Power Supply Bay Power Connector Socket Mounting the Switch OmniSwitch 6600 Family Chassis Top ViewAirflow Considerations Installing the Switch on a Tabletop or Bench Installation Options Attaching a Rack-Mount Flange Attaching the Switch to the Rack Rack Mounting Stacked Configurations Grounding the Chassis Power CordsSpecifications Power Cord Types Backup Power Supply Backup Power Supply Front Panel OS6600-BPS ShownPower Switch. indicates on position indicates off position BPS Power Connector OS6600-BPS-P Backup Power Supply Front PanelOS6600-BPS-P Backup Power Supply Back Panel OS6600-P24 Connectors OS6600-BPS Backup Power Supply Specifications Power Supply Specifications OS6600-BPS-P PoE Backup Power Supply Specifications Power Supply RedundancyOS6602-BPS Backup Power Supply Specifications OS6602-BPS-DC Backup Power Supply Specifications Redundant AC Circuit Recommendation OmniSwitch 6600 Family Redundant AC Circuit ExampleBackup Factory-Installed Primary Power Supply AC Circuit BackUp Factory-Installed Primary Power Supply Installing a Backup Power Supply Orienting the Backup Power SupplyHot Swapping Tightening the Captive Screws Inserting the Backup Power Supply Removing a Backup Power Supply Removing the Backup Power SupplyLoosening the Captive Screws Blank Cover Panel Requirement Viewing Primary and Backup Power Supply Status Viewing Power Supply Status for Stacked Configurations Slot Number is SpecifiedNo Slot Number is Specified MiniGBIC Slots Gigabit Ethernet Uplink ModulesOS6600-GNI-U2 OS6600-GNI-U2 Gigabit Ethernet Uplink Front Panel OS6600-GNI-U2 Uplink Module Specifications OS6600-GNI-C2 Uplink Module Specifications OS6600-GNI-C2OS6600-GNI-C2 Ethernet Uplink Front Panel Stacking Module Front Panel Stacking Module SpecificationsHssdc Stacking Connectors Stacking Module Inserting the Uplink or Stacking Module Installing Uplink and Stacking Modules LINK/ACT LINK/ACT Removing Uplink and Stacking Modules Removing the Module Mini Gigabit Interface Converter MiniGBIC Mini Gigabit Interface Converters MiniGBICs MiniGBIC-LH-70 Technical Specifications MiniGBIC SpecificationsMiniGBIC-SX Technical Specifications MiniGBIC-LX Technical Specifications Inserting the MiniGBIC OS6648 Shown Installing MiniGBICs Removing MiniGBICs Installed MiniGBIC OS6648 Shown SFP Module Mbps SFPs OS6600-U24 SFP-100-LC-SM40 Technical Specifications Mbps SFP SpecificationsSFP-100-LC-MM Technical Specifications SFP-100-LC-SM15 Technical Specifications Mtrj SFP-100-MTRJ-MM Technical Specifications Inserting the SFP Installing SFPs OS6600-U24 Removing SFPs OS6600-U24 Viewing Chassis Temperature Status Temperature Management Viewing Temperature Status for Stacked Configurations Temperature Errors Viewing Fan Status Viewing Fan Status for Stacked Configurations No Slot Number is Specified Air Exhaust. The airflow Chassis AirflowRight Side Air Intake Vent Left Side Fan Exhaust Vents Effects of Missing Blank Panels on Chassis Airflow Blank Cover Panels Pin Number Description Pinouts10/100 Ethernet Port RJ-45 Pinout Copper Gigabit Ethernet Port RJ-45 Pinout RS232 Console Port Female DB9 Connector Pinout RJ-45 Console Port Connector PinoutPin Number Signals as DCE Console Port Serial Connection Default Settings Modifying the Serial Connection SettingsConsole Port Additional table output not shown Session xon-xoff disable Configuring X-ON/X-OFF Protocol Hardware Information Viewing Basic Chassis Information Detailed Slot and Component Information Slot and Component Information Screen output on next Gbic Basic Primary Slot and Component Information ON/X-OFF Protocol Status Basic Chassis Information Managing MAC Addresses on the Switch OmniSwitch 6600 Family MAC Range SpecificationsMAC Range Guidelines Viewing the Base Chassis MAC Address Determining Current MAC Address Allocation on the SwitchBase Chassis MAC Address in Stacked Configurations Base Chassis MAC Address as Unique Identifier Installing and Managing Power over Ethernet PoE This Chapter Watts Power over Ethernet Specifications Viewing OS6600-BPS-P Status Setting the PoE Operational Status Configuring Power over Ethernet ParametersPower over Ethernet Defaults Understanding and Modifying the Default Settings Configuring the Total Power Allocated to a Port Configuring the Total Power Allocated to a SwitchDisabling PoE Setting Port Priority Levels Lanpower capacitor-detection 2 disable Setting the Capacitor Detection Method Enabling Priority Disconnect Setting Priority Disconnect StatusUnderstanding Priority Disconnect Disabling Priority Disconnect Understanding Priority Disconnect Priority Disconnect is Disabled Monitoring Power over Ethernet via the CLI Monitoring Power over Ethernet via the CLI Managing OmniSwitch 6600 Family Stacks Parameter Description Configuration Steps Default Value Specifications and Default Values Stack Overview Stack Composed of Four OmniSwitch 6648 Switches Slot Numbers within a Stack Stacking Resiliency and Redundancy CMM Role Redundancy CMM Roles in a Stack File Management Commands Switch PrimaryCMM Commands Chassis Management and Monitoring Commands Switch Logging and Monitoring Commands Memory Monitoring CommandsSession Management Commands Assigning Slot Numbers Setting Up a Stacked Configuration SEL Button Location Continue to Connecting Cables to Stacking Ports on Slot Numbering Example Stack of Four Switches with Unique Slot Numbers Attaching the Stacking Cable to a Stacking Port Connecting Cables to Stacking Ports Recommended Redundant Connection Between Switches Connecting the Switches in the Stack Stacking Cable Redundancy Example Redundant Stack Connection Booting the Stack Verifying Slot Number AssignmentsVerifying Primary and Secondary Status for the Stack Idle Status Reloading the Switch with the Secondary CMM Role Managing Switches in a StackReloading a Switch with a Primary or Secondary CMM Role Reloading the Switch with the Primary CMM Role Changing the Secondary CMM Role to Primary Synchronizing Switches in a Stack Stack Behavior During Takeover Resetting All Switches in a Stack Managing and Monitoring OmniSwitch 6600 Family Stacks Monitoring StacksMonitoring Stack Topology Secondary Active Waste Electrical and Electronic Equipment Weee Statement Declaration of Conformity CE Mark EMC Standards Safety StandardsSafety and Environmental Standards Standards Compliance FCC Class A, Part Canada Class a StatementCISPR22 Class a warning Class a Warning for Taiwan and Other Chinese Markets Vcci Electrical Storm Warning Translated Safety WarningsChassis Lifting Warning Blank Panels Warning Invisible Laser Radiation Warning Installation Warning Operating Voltage Warning Lithium Battery Warning Español Power Disconnection WarningProper Earthing Requirement Warning Français Restricted Access Location Warning Read Important Safety Information Warning Wrist Strap Warning Instrucciones de seguridad en español Advertencia de pulsera antiestática Advertencia sobre una apropiada conexión a tierraLeer información importante de seguridad Advertencia de acceso restringido Commit file command Commit system command Copy flash-synchro commandNumerics Reload all command Reload command Session xon-xoff command Show chassis command Show cmm command Show fan commandShow hardware info command Temp-threshold command Takeover command