Alcatel-Lucent 6600 manual OS6648 Specifications, 10/100 Ethernet Port Specifications

OmniSwitch 6600 Family Chassis and Hardware ComponentsOmniSwitch 6648

OS6648 Specifications

Total number of 10/100 Mbps	48
ports per switch
Total number of Gigabit Ether-	4 (for stand-alone switches);
net ports per switch	2 (for stacked configurations)
Total number of 10/100 Mbps	384 (stack of eight switches)
ports per stack
Total number of Gigabit Ether-	16 (stack of eight switches)
net ports per stack
Fabric capacity	10.0 Gbps full duplex; 20.0 Gbps aggregate
Current draw	Approximately 2.3 Amps
Power	Approximately 55 Watts
Total power supplies	2 (one factory-installed power supply and
	one optional backup power supply)
Flash memory size	64 MB
RAM memory size	128 MB
Overall Width (rack-mount	19.125 inches
flanges included)
Chassis Width (rack-mount	17.2 inches
flanges not included)
Height	2.65 inches
Height (rack units)	1.5 RU
Chassis Depth	14 inches
Chassis Weight	Approximately 14 lbs (15.5 lbs with optional
	backup power supply installed)
Humidity	5% to 90% Relative Humidity (Operating)
	0% to 95% Relative Humidity (Storage)
Altitude	Sea level to 10,000 feet (3 km)
10/100 Ethernet Port Specifications
Connector type	RJ-45
Standards supported	IEEE 802.3u, IAB RFCs 826, 894
Data rate	10 or 100 Mbps (full or half duplex)
Maximum frame size	1518 Bytes; 1522 Bytes with IEEE 802.1Q tags
Connections supported	10BaseT hub or device; 100BaseTX hub or device
Cable supported	10BaseT: unshielded twisted-pair (UTP)
	100BaseTX: unshielded twisted-pair (UTP), Category 5, EIA/TIA 568
	or shielded twisted-pair (STP), Category 5, 100 ohm
Maximum cable distance	100 meters

OmniSwitch 6600 Family Hardware Users Guide September 2006 page 2-13