OmniSwitch 6600 Family Chassis and Hardware Components

OmniSwitch 6600-U24

 

 

 

 

OmniSwitch 6600-U24

The OS6600-U24 is a stackable edge/workgroup switch offering 24 fiber 100 Mbps Ethernet SFP ports. The OS6600-U24 can also be equipped with up to four Gigabit Ethernet ports for connections to a high speed backbone or server.

The front panel of the OS6600-U24 chassis contains the following major components:

Console (RJ-45) port

Stack indicator LED

24 fiber 100 Ethernet SFP ports

One slot for OS6600-GNI-U2 (fiber) or OS6600-GNI-C2 (copper) Gigabit Ethernet uplink module

One slot for Gigabit Ethernet uplink module as described above or stacking module

The following SFP transceivers are available for the OS6600-U24:

SFP-100-LC-MM—100Base FX multimode 62.5/125 and 50/125 micron fiber, supports distances up to 2 km; uses LC connectors.

SFP-100-LC-SM15—100Base FX single mode 9/125 micron fiber, supports distances up to 15 km; uses LC connectors.

SFP-100-LC-SM40—100Base FX single mode 9/125 micron fiber, supports distances up to 40 km; uses LC connectors.

SFP-100-MTRJ-MM—100Base FX multimode 62.5/125 and 50/125 micron fiber, supports distances up to 2 km; uses MTRJ connectors.

Note. See “Installing SFPs (OS6600-U24)” on page 2-51for information on installing SFP transceivers.

Refer to the illustration on the following page for more front panel information. For detailed LED descrip- tions, refer to page 2-18. For information on the chassis rear panel, refer to page 2-20.

OmniSwitch 6600 Family Hardware Users Guide September 2006

page 2-4

Page 28
Image 28
Alcatel-Lucent manual OmniSwitch 6600-U24