Alcatel-Lucent 6600 manual Power over Ethernet Specifications, Watts

Installing and Managing Power over Ethernet (PoE) Power over Ethernet Specifications

Power over Ethernet Specifications

The table below lists general specifications for Alcatel’s Power over Ethernet support. For more detailed power supply and Power Source Equipment (PSE) specifications, refer to Chapter 2, “OmniSwitch 6600 Family Chassis and Hardware Components.”

IEEE Standards supported	IEEE 802.3af DTE Power via MDI
Default PoE administrative status	Enabled
Default PoE operational status	Disabled (PoE must be activated on a switch-
	by-switch basis via the lanpower start com-
	mand.)
OmniSwitch 6600 Family platforms supporting PoE	OmniSwitch 6600-P24
Backup power supply for the OS6600-P24	OS6600-BPS-P
Cable distances supported	100 meters (approx.)
Total number of PoE-capable ports per OmniSwitch	24
6600-P24
Maximum number of PoE-capable ports per stack	192
Default amount of inline power allocated for each port	15400 milliwatts
Range of inline power allowed for each port	3000–20000 milliwatts
PoE Current draw	Approximately 4.3 Amps
PoE Power	Approximately 210 watts
Range of inline power allowed for each switch in a stack	37–210 watts

OmniSwitch 6600 Family Hardware Users Guide September 2006 page 3-3