![](/images/new-backgrounds/1202160/20216097x1.webp)
OmniSwitch 6600 Family Chassis and Hardware Components | Power Cords |
|
|
|
|
Power Cords
Since the power cord is the power supply’s main disconnect device, it should be plugged into an easily accessible outlet. In the event that your power cord is lost or damaged, refer to the specifications below.
Specifications
The power cord to be used with
The power cord to be used with
European cords must be Harmonized (HAR) type. Refer to the information below for power plug types by region:
Power Cord Types
North America | NEMA |
|
|
United Kingdom / Ireland | BS 1,363 |
|
|
Europe | CEE 7/7 |
|
|
Japan | JIS 8,303 |
|
|
Australia | AS 3,112 |
|
|
India | BS 546 |
|
|
Italy | CIE 2,316 |
|
|
Switzerland / Liechtenstein | SEV 1011 |
|
|
Denmark / Greenland | SRAF 1,962 / D816 / 87 |
|
|
Argentina | |
|
|
Grounding the Chassis
The switch has two threaded holes for grounding screws located on the back of the chassis. These holes use
Use this connector to supplement the ground provided by the AC power cord. To do so, install a Panduit Grounding Lug (type
OmniSwitch 6600 Family Hardware Users Guide September 2006 | page |