
OmniSwitch 6600 Family Chassis and Hardware Components | Gigabit Ethernet Uplink Modules |
|
|
|
|
Stacking Module
Stacking modules are used to connect OmniSwitch 6624,
For information on installing stacking modules, refer to page
Note. Stacking modules cannot be hot swapped at any time. For more information on hot swapping, refer to Chapter 1, “OmniSwitch 6600 Family.”
HSSDC Stacking Connectors
The stacking module provides two dedicated High Speed Serial Data Connectors (HSSDCs). These connectors are used to connect OS6624/
LINK/ACTLINK/ACT
LINK/ACT LEDs
Each stacking connector has a
indicates the link and activity status for each connector. The LED dis- | |
plays green when a valid cable connection exists. Flashes green as data is | |
being transmitted to, or received from, the adjacent switch in the stack. | |
Stacking Module Front Panel | |
|
|
Stacking Module Specifications |
|
|
|
Number of ports | 2 |
|
|
Power | Approximately 8 Watts |
|
|
Data Speed | 1 Gigabit per second per stacking cable installed |
|
|
Connector type | High Speed Serial Data Connector (HSSDC) |
|
|
Chassis port locations | 27 and 28 (OS6624, |
| P24); |
| 51 and 52 (OS6648) |
|
|
No | |
|
|
OmniSwitch 6600 Family Hardware Users Guide September 2006 | page |