show gvrp configuration

Example

(Force10_S50) #show gvrp configuration 0/1

Port

Interface

Join

Leave

 

LeaveAll

Timer

Timer

 

Timer

GVRP Mode

-----------

(centisecs)

(centisecs)

(centisecs)

-----------

-----------

-----------

-----------

0/1

20

60

 

1000

Disabled

Force10-S50 #show gvrp configuration

 

all

Port

Interface

Join

Leave

 

LeaveAll

Timer

Timer

 

Timer

GVRP Mode

-----------

(centisecs)

(centisecs)

(centisecs)

-----------

-----------

-----------

-----------

0/1

20

60

 

1000

Disabled

0/2

20

60

 

1000

Disabled

0/3

20

60

 

1000

Disabled

0/4

20

60

 

1000

Disabled

0/5

20

60

 

1000

Disabled

0/6

20

60

 

1000

Disabled

0/7

20

60

 

1000

Disabled

0/8

20

60

 

1000

Disabled

0/9

20

60

 

1000

Disabled

0/10

20

60

!

1000

Disabled

!----------

output truncated---------

 

 

 

Figure 50 show gvrp configuration Command Output Example

Interface

Valid unit, slot and port number separated by forward slashes.

 

Join Timer—Specifies the interval between the transmission of GARP PDUs registering (or

 

re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is

 

an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100

 

centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest

 

granularity of specification is 1 centisecond (0.01 seconds).

 

Leave Timer—Specifies the period of time to wait after receiving an unregister request for an attribute

 

before deleting the attribute. Current attributes are a VLAN or multicast group. This may be considered

 

a buffer time for another station to assert registration for the same attribute in order to maintain

 

uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant basis.

 

Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60

 

centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).

 

LeaveAll Timer—This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll

 

PDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to

 

maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis. The

 

Leave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime.

 

Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000

 

centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).

Port GMRP Mode—Indicates the GMRP administrative mode for the port. It may be enabled or disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled.

Port GVRP Mode—Indicates the GVRP administrative mode for the port. It may be enabled or disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled.

230

GARP, GVRP, and GMRP Commands

Page 230
Image 230
Force10 Networks S2410s manual Show gvrp configuration, GARP, GVRP, and Gmrp Commands