Force10 Networks S2410s Protocol vlan group all, Pvid Vlan, No protocol vlan group all groupid

protocol vlan group all

Command
	Version 2.3	Added Interface Range mode.
History
Related
	interface range	Defines an interface range and accesses the Interface Range mode
Commands

protocol vlan group all

	This command adds all physical interfaces to the protocol-based VLAN identified by
	groupid. A group may have more than one interface associated with it. Each interface and
	protocol combination can only be associated with one group. If adding an interface to a group
	causes any conflicts with protocols currently associated with the group, this command will
	fail and the interface(s) will not be added to the group.
	The referenced VLAN should be created prior to the creation of the protocol-based VLAN
	except when GVRP is expected to create the VLAN.
	The no version of this command removes all interfaces from this protocol-based VLAN
	group that is identified by this groupid.
Syntax	[no] protocol vlan group all groupid
Default	None
Mode	Global Config

pvid (VLAN)

Mode

Command History

Related Commands

Configure the VLAN ID for a specific port.

Interface VLAN

Version 2.3	Introduced but deprecated in favor of the tagged command
untagged	Sets tagging to disabled for a specific port (or range of ports) in the selected VLAN.

128 System Configuration Commands