Force10 Networks S2410s manual Encapsulation Vlan, Interface vlan, Interface Vlan

	encapsulation (VLAN)
show interfaces	Displays information, including the description, about a selected interface.
show running-config	Display/capture the current setting of different protocol packages supported
	on the switch.

encapsulation (VLAN)

Syntax

Default

Mode

Command History

Related Commands

This command configures the link layer encapsulation type for the packet within the VLAN. Acceptable encapsulation types are Ethernet and SNAP.

encapsulation {ethernet snap}

ethernet

Interface VLAN

Restrictions—Routed frames are always Ethernet-encapsulated when a frame is routed to a VLAN.

Version 2.3	Introduced
interface vlan	Creates a VLAN, assigns it an ID and then enters the Interface VLAN mode

interface vlan

Syntax

Default

Mode

Command History

This command creates a new VLAN if the identified VLAN ID does not already exist, or else the command selects an existing VLAN. Then, in either case, the command invokes the Interface VLAN mode, in which you have access to VLAN configuration commands for the specified VLAN.

interface vlan vlanid

The vlanid is a valid VLAN identification number (ID 1 is reserved for the default VLAN). VLAN range is 2-3965.

The no version of this command deletes an existing VLAN.

None

Global Config

Version 2.3 Introduced. Replaces vlan database and vlan commands.

SFTOS Command Reference for the S2410, Version 2.4.1.0 123