Force10 Networks S2410s manual Snmp trap link-status all, Snmptrap snmpversion

snmp trap link-status

snmp trap link-status

This command enables link status traps by interface.

Syntax [no] snmp trap link-status

The no version of this command disables link status traps by interface.

Mode

Command

History

Related

Commands

Note: This command is valid only when the Link Up/Down Flag is enabled. See snmp-server enable traps linkmode command.

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Added Interface Range mode.
interface range	Defines an interface range and accesses the Interface Range mode
interface	Identifies an interface and enters the Interface Config mode.

snmp trap link-status all

This command enables link status traps for all interfaces.

Syntax [no] snmp trap link-status all

The no version of this command disables link status traps for all interfaces.

Note: This command is valid only when the Link Up/Down Flag is enabled. See

snmp-server enable traps linkmode.

Mode Global Config

snmptrap snmpversion

	This command selects between SNMP version 1 and version 2 traps to be sent for the selected
	SNMP trap name.
Syntax	snmptrap snmpversion name ipaddr {snmpv1snmpv2}
Mode	Global Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 103