Force10 Networks S2410s manual Mac-address, Mac-type, None Interface ManagementEthernet

mac-address

Mode

Command History

Related Commands

The value for ipaddr is the IP Address of the management interface. This is the IP address that you would enter in your Web browser to access the SFTOS Web User Interface.

The value for subnetmask is a 4-digit dotted-decimal number which represents the subnet mask of the interface.

Enter no ip address to remove the IP Address and subnet mask.

(Config-if-ma)# prompt within the Global Config mode

Version 2.3	Introduced: Replaces the network parms command for the IP address and
	subnet mask components of the management address.
management route default		Sets the IP gateway of the switch.
interface managementethernet		Invokes the (Config-if-ma)# prompt.
show interface		Displays a summary of statistics for a specific port,
		including the management port, or a count of all CPU
		traffic based upon the argument.

mac-address

Configure the MAC address to be used for the management VLAN.

Syntax

Default

Mode

Command History

Related Commands

mac-address mac-address

None

Interface ManagementEthernet

Version 2.3	Introduced. Replaces the network mac-addresscommand.
management route default		Sets the IP gateway of the switch.
interface managementethernet		Invokes the Interface ManagementEthernet mode, the
		(Config-if-ma)# prompt.

mac-type

Configure the MAC address to be used for the management VLAN.

Syntax mac-type {local burnedin}

SFTOS Command Reference for the S2410, Version 2.4.1.0 59