Force10 Networks S2410s manual Show spanning-tree summary, Show spanning-tree vlan, Spanning-tree

show spanning-tree summary

show spanning-tree summary

	This command displays spanning tree settings and parameters for the switch. The following
	details are displayed on execution of the command.
Syntax	show spanning-tree summary
Mode	Privileged Exec and User Exec
	Spanning Tree Adminmode—Enabled or disabled.
	Spanning Tree Version—Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE
	802.1D) based upon the Force Protocol Version parameter
	Configuration Name—Identifier used to identify the configuration currently being used.
	Configuration Revision Level—Identifier used to identify the configuration currently being used.
	Configuration Digest Key—Identifier used to identify the configuration currently being used.
	MST Instances—List of all multiple spanning tree instances configured on the switch

show spanning-tree vlan

	This command displays the association between a VLAN and a multiple spanning tree
	instance. The vlanid corresponds to an existing VLAN ID.
Syntax	show spanning-tree vlan vlanid
Mode	Privileged Exec and User Exec
	VLAN Identifier—The VLANs associated with the selected MST instance.
	Associated Instance—Identifier for the associated multiple spanning tree instance or "CST" if associated
	with the common and internal spanning tree

spanning-tree

This command sets the spanning-tree operational mode to enabled.

The no version of this command sets the spanning-tree operational mode to disabled. While disabled, the spanning-tree configuration is retained and can be changed, but is not activated.

Syntax [no] spanning-tree

SFTOS Command Reference for the S2410, Version 2.4.1.0 265