Pioneer VSX-47TX manual In SEMI AUTO mode: Press ENTER to, exit the process

Setting Up for Surround Sound

3

4

3.3.Channel Level Manual

Front	L		[	+10. 0dB			]
Center			[	+10. 0dB			]
Front	R		[+10. 0dB ]
Surround		R	[+10. 0dB ]
SurrBack		R	[		- - - dB ]
SurrBack		L	[		- - - dB ]
Surround		L	[+10. 0dB ]
Subwoofer			[		0. 0dB ]
[Return]
3.3. Channel			Level
			Semi Auto
Front	L		[+10. 0dB ]
Center			[+10. 0dB ]
Front	R		[+10.			0dB ]
Surround		R	[+10.			0dB ]
SurrBack		R	[		- - - dB ]
SurrBack		L	[		- - - dB ]
Surround		L	[+10.			0dB ]
Subwoofer			[		0.	0dB		]

Return = Push Enter

2.3.Channel Level Manual

Front	L		[	+1. 5dB ]
Center			[	+1. 5dB ]
Front	R		[	+2. 0dB ]
Surround		R	[	-3. 5dB ]
SurrBack		R	[	-1.	5dB ]
SurrBack		L	[	+3.	0dB ]
Surround		L	[	+2.	0dB ]
Subwoofer			[+10.		0dB ]

[Return]

3Adjust the level of each channel using the 23 buttons (except for the AUTO setting where the adjustment is done automatically).

NOTE : The volume of the subwoofer test tone tends to sound lower than it actually is. You may need to adjust the level after testing with an actual soundtrack.

In MANUAL (manual test tone) mode

This mode lets you switch the test tone between each speaker manually with the 5∞ buttons.

In SEMI AUTO (automatic test tone) mode

Adjust the level of a speaker as it’s emitting the test tone. The tone will automatically switch between speakers after sounding for 2-3 seconds. The test tone is output in the following order:

FL CT FR SR

SW SL SBL SBR

If you are using a Sound Pressure Level (SPL) meter

Take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighting /slow reading).

4In MANUAL mode: When done select RETURN with the 5∞ buttons and press ENTER.

In SEMI AUTO mode: Press ENTER to

exit the process

The display on the receiver will say RESUME and the

MASTER VOLUME will return to its original position.

Next, proceed to Acoustic Calibration.

memo You can change the channel level of each speaker at any time by using the EFFECT CH/SEL. and +/- buttons on the remote control. You can set the levels for each three groups of the listening modes

(STANDARD/HOME THX, ADVANCED CINEMA/ADVANCED CONCERT, STEREO) and MULTI CH IN mode but keep in mind that all your settings will be cleared if you use the Surround Setup or Auto Surround Sound Setup to set the channel levels at a later date.

40