Pioneer VSX-47TX manual Display, 1SIGNAL SELECT indicators, 2Program Format indicators

Displays & Controls

Display

All the display information is explained and/or referenced here.

1			2		3	4
SIGNAL
	AUTO
		RF
DIGITAL			OVER ATT
			SP 3AB
ANALOG
				TAPE 2

TUNED STEREO MONO

E ON

5

DIGITAL

DISC MTRX

PRO LOGIC

Neo :6 MPEG

2ch PLAYBACK

8 7 6

1SIGNAL SELECT indicators

Light to indicate the input signal you selected.

ANALOG: Lights when analog signals are assigned.

DIGITAL: Lights when digital audio signals are selected.

2RF: Lights when 2 RF signals are assigned. AUTO: Lights when the receiver is set to select the input signal automatically.

2Program Format indicators

For Dolby Digital or DTS sources : These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1 channel playback flag is being used.

5 Digital format indicators

2DIGITAL : Lights when a Dolby Digital signal is detected.

DTS: Lights when a DTS signal is detected.

MPEG: Lights when an MPEG signal is detected.

THX: Lights when the HOME THX mode is selected.

EX: Lights during Surround EX matrix processing.

ES: Lights during DTS ES processing.

DISC: Lights during DTS ES discrete processing

MTRX: Lights during DTS ES matrix processing

2PRO LOGIC II: Lights during Dolby Pro Logic II processing.

NEO:6: Lights during NEO:6 processing. 2CH PLAYBACK Lights during two-channel playback.

L – Left front channel. C – Center channel.

R – Right front channel.

LS – Left surround channel. S – Surround channel (mono). RS – Right surround channel.

LFE – Low Frequency Effects channel.

((( ))) – Lights when LFE signal is input.

3Analog level indicators

OVER – This lights if the signal is in danger of distorting for analog source signals. Press INPUT ATT on the front panel to lower the signal level.

ATT – Lights when INPUT ATT is used to reduce the level of the analog source signal.

4Character display

Shows current mode, status, etc.

6Speaker indicators

Light to indicate the current speaker system, A and/or B.

7TAPE 2 indicator

Lights when the TAPE 2 monitor is on.

8TUNER indicators

MONO: Lights when the tuner is set to receive FM broadcasts and when selected MPX mode.

STEREO: Lights when a FM stereo broadcast is received in the auto stereo mode.

TUNED: Lights when a broadcast is received.

34