Displays & Controls

12 MIDNIGHT button (see p.51)

Use to switch the receiver into MIDNIGHT mode.

13 TONE control buttons TONE button

This button switches between TONE ON and TONE BYPASS, which bypasses the tone circuitry.

BASS/TREBLE button (see p.52)

Use to select whether the bass or treble will be adjusted.

(–/+) buttons (see p.52)

Use to adjust the frequency levels.

20 SIGNAL SELECT button (see p.45)

Use to select the type of signal being input into the receiver. Press SIGNAL SELECT repeatedly to select one of the following:

ANALOG – To select an analog signal.

DIGITAL – To select an optical or coaxial digital signal.

2RF – To select a 2 RF signal.

AUTO – This is the default. If there are analog, digital and 2 RF signals input, the receiver automatically selects the 2 RF signal. If there are analog and digital signals input, the digital will be selected.

14 DIGITAL NR button (see p.50)

21 VIDEO SELECT button

Switches the receiver between the various

Switches the DIGITAL NR on or off (cannot be

types of video input.

used in THX or MULTI CH IN modes).

 

15 TUNER control buttons (see p.57-61)

CLASS button

Press repeatedly to switch the preset station classes.

(–/+) buttons

Use to choose programmed radio stations.

16 LISTENING CH SELECT button (see

p.44)

Use this button to select the number of channels used for playback (5.1, 7.1 or AUTO).

17 MULTI-ROOM & SOURCE button (see

p.74-78)

Press to use the multi room feature (requires an optional PIONEER Multi-Room Remote Sensor Unit MR-100 or another IR receiver).

CONTROL button (see p.74-78)

Used together with the INPUT SELECTOR to select the function or use with the MASTER VOLUME to select the volume of the MULTI ROOM system.

ON/OFF button (see p.74-78)

Use to switch Multi-room function on or off.

18 PHONES jack

Connect headphones for private listening (no sound will be heard through the speakers).

22 TAPE 2 MONITOR button

Selects the tape deck (or CD-R, etc.) connected to the TAPE 2 MONITOR inputs/outputs. Allows monitoring of a recording as it's being made.

23 MULTI CH INPUT button

Selects the component (for example, a DVD- Audio player) you have hooked up to the MULTI CH INPUT terminals.

24 SET UP MIC jack (see p.13)

Plug in the set up mic (the remote control) here. This is very important for setting up your system to get proper surround sound.

25 Front VIDEO INPUT jacks (see p.18)

DIGITAL IN

Digital input for connecting a game console, DVD player, video camera (etc.), that has an optical digital connection.

S VIDEO

Video input for connecting a video camera (etc.), that has an S video out.

RCA VIDEO / AUDIO (L/R)

Video input for connecting a video camera, etc. That has standard RCA video/audio outputs.

PREPARATION

19 SP SYSTEM A/B button (see p.71)

Use to select the speaker system. A is the primary setting. The button cycles through the speaker systems as follows: A]B]A&B]off. Different conditions apply when bi-amping the speakers. For this case refer to page 70.

33

Page 33
Image 33
Pioneer VSX-47TX manual Tone control buttons Tone button, BASS/TREBLE button see p.52, + buttons see p.52, Phones jack