Pioneer VSX-47TX manual Channel Level channel balance, It isn’t use the 5∞ buttons to select

Setting Up for Surround Sound

CHANNEL LEVEL (channel balance)

The following steps show you how to balance the sound output level of your speakers. Proper speaker balance is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.35) first. If you’re not sure of the best setting for your system, we recommend setting the CHANNEL LEVEL to AUTO.

5	6	7	8	1	CHANNEL LEVEL should be selected. If
VIDEO SEL	SIGNAL SEL	TAPE 2	EFFECT/CH SELL
TONE	BASS/TREBLE	– +10 + DISC			it isn’t use the 5∞ buttons to select
9	DIRECT ACCESS DISP MODE
	0		ENTER
SYSTEM SETUP			REMOTE SETUP	1~4	and press ENTER.
TUNER EDIT
MENU
	ENTER
STATUS			EXIT
GUIDE			RETURN		Use the 5∞ buttons to select a channel
MPX	DTV ON/OFF			2
¶	8		EXTRA MENU
TUNING –	BAND		TUNING +		level setting mode, then press ENTER.
STATION –	DTV MENU CLASS		STATION +
1	3		¡

4 7	¢
CHANNEL–	CHANNEL+

1 2.Surround Setup

[ Check ]

[ 1.Speaker Systems ] [ 2.Channel Delay ]

[ 3.Channel Level ]

[ 4.Acoustic Cal EQ ] [Return]

2 3.3. Channel Level

[Manual] [Semi Auto] [Auto]

Normal Surround [Return]

Your Speaker Systems

” Normal Surround ”

Test tones will be output.

There are three ways to set the CHANNEL LEVEL: MANUAL; SEMI AUTO; AUTO.

MANUAL : For this setting method you move the test tone manually and adjust the channel level.

SEMI AUTO : In this setting the test tone moves by itself and you set the levels.

AUTO : This way of setting the levels is like that described in the Quick Start Guide (p.13). The levels are set automatically by the receiver as it outputs the test tones. For this setup you must have the mic on the remote control connected (see page 13).

WARNING : Be prepared! The test tones are output at a high volume level.

MASTER VOLUME rotates to the reference position (0 dB) and the display on the receiver flashes TEST TONE. After a few seconds the test tone is output.

memo • If your subwoofer has a volume control, set it to the middle position before doing these operations.

SURROUND SET UP

39