Pioneer VSX-47TX Switching A/B Speaker System, Front speakers. If you have set the Front speakers

Using Other Functions

Switching A/B Speaker System

This unit has three types of speaker systems A, B, A&B. This switch allows you to select the speaker system you will use.

DVD/LD	TV	SAT	TV CONT
MULTI CONTROL
VCR1/	VCR2	VIDEO	MULTI
DVR			OPERATION

CD	CD-R/	TUNER	RECEIVER
	TAPE1
DIMMER	INPUT ATT	LOUDNESS	SPEAKER A/B

1 2 3 4

VIDEO SEL	SIGNAL SEL	TAPE 2 EFFECT/CH SELL
5	6	7	8
TONE	BASS/TREBLE	– +10	+ DISC

90 ENTER

	DIRECT ACCESS DISP MODE
SYSTEM SETUP		REMOTE SETUP
MENU
TUNER EDIT
	ENTER
STATUS		EXIT
GUIDE		RETURN
MPX	DTV ON/OFF
¶	8	EXTRA MENU

1

2

1Press the RECEIVER button.

2Use the SPEAKER A/B button on the remote control (or SP SYSTEM A/B on the front panel) to cycle through

the different speaker systems.

The button cycles through the speaker systems as follows: A]B]A&B]off.

2 A(SP3A):

In what way the sound will be output depends on the selections you made in "SPEAKER SYSTEMS" (p.36) and your choices here. See the explanations for a guide to how the sound will be output when you have chosen NORMAL SURROUND (see p.36- 37

Sound is output from speaker system A and the same signal is output from the pre out terminals.

B(SP3B):	Sound is output from the two speakers in speaker
	system B. Multichannel sources will be downmixed to
	these two speakers and the same signal is output from
	the FRONT pre outs.
A&B(SP3AB):	Sound is output from speaker system A's FRONT
	speakers and the B speakers. The other channels
	(excluding the LFE channel) will be downmixed to the
	FRONT speakers. If you have set the FRONT speakers
	to "SMALL" the low frequencies of all the channels are
	output from the subwoofer. The same sound is output
	from the B speakers and the FRONT pre out terminals.
OFF(SP3 ):	No sound is output from the speakers. Depending on
	the input signal and settings in "SPEAKER SYSTEMS"
	sound may be output from the subwoofer. The same
	sound is output from the pre out terminals as when
	selecting speaker system A (above).

memo	• What is output from the subwoofer depends on the SPEAKER SYSTEM settings and the type of
	source.

•Depending on the settings in "SPEAKER SYSTEMS" and the MULTI CH IN SELECT, output from the SURROUND BACK pre out terminals may change.

•When using headphones the speakers are switched off.

•Please use speakers with a nominal impedance rated 6Ω -16Ω .

EXPERT

71