Pioneer VSX-47TX manual Using Headphones, Video Select, Plug headphones into the headphone, Basic

Basic Operation

Using Headphones

	1	Plug headphones into the headphone
		jack on the front of the receiver.
		No sound will be audible from the speakers when
		headphones are plugged in.
1 headphone jack	memo		• All listening modes will be downmixed to 2 chan-
			nels.
			• If you’re listening to a 2 channel source there will
			be no matrix decoding (i.e. you will not be able to
			get surround sound decoding).
			• If your U-shaped connectors (see p.30) aren’t in
			place you won’t be able to use headphones.

Video Select

This function allows you to listen to one sound source while you watch a different video source on your TV. The sound source is set in the normal fashion as explained on p.43 & 44 You then change the video input with the VIDEO SEL button.

1Press RECEIVER.

		SETUP
				2	Press the VIDEO SEL button on the
S0URCE	TV	SYSTEM RECEIVER			remote control to cycle through the
		OFF			different possible video inputs.
DVD/LD	TV	SAT	TV CONT		The first press shows the video input you are currently
VCR1/			MULTI
MULTI CONTROL
DVR	VCR2	VIDEO	OPERATION	1	using. After that pressing VIDEO SELECT cycles though
CD	CD-R/	TUNER	RECEIVER		the possibilities in the following order:
	TAPE1
DIMMER	INPUT ATT LOUDNESS		SPEAKER A/B

2	1	2	3	4	DVD/LD	TV	SAT	VIDEO
	5	6	7	8
	VIDEO SEL	SIGNAL SEL	TAPE 2 EFFECT/CH SELL
	TONE	BASS/TREBLE	– +10	+ DISC
	9	0		ENTER	OFF		VCR 2	VCR 1/DVR
			D RECT ACCESS D SP MODE

	The OFF setting means you are listening without a
	video signal. (Also, when you select CD-R/TAPE1/MD,
	CD, TUNER, or PHONO functions the VIDEO SELECT
	will be set to off.)
	After choosing a video input the display on the receiver
	will show that input for about 5 seconds and then
	revert to showing the listening mode the receiver is in.
2	memo	• The VIDEO SELECT remains set to the input you
		chose until you change the audio input.
		• If you change audio functions the receiver will
		reset itself to make the video and audio inputs
		correspond.
		Also, if you switch the power of the receiver off
		when you turn it back on the video and audio in-
		puts will reset so that they correspond.

BASIC

55