Pioneer VSX-47TX Setting Up for Surround Sound, 1Turn on the receiver and your TV, press, control

Setting Up for Surround Sound

To ensure the best possible surround sound, complete the following setup operations. Some of these are the same (and take precedence over) the settings you made in the Quick Start Guide, so consider if the ones you made at that time were adequate. If you feel they were, move on to the next setting here. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers, etc.). These setup operations use on-screen displays (OSDs) on your TV to display the settings and choices so be sure your TV and receiver are properly hooked up and that your TV is set to this receiver. You need to connect the remote control, with its built in mic, to the front panel of the receiver so that it can measure the sound and ensure the proper settings. For more information on the remote control hookup see page 13.

1Turn on the receiver and your TV, press

		SETUP		the RECEIVER button on the remote
				control.
S0URCE	TV	SYSTEM RECEIVER		Make sure your TV is connected and set to the receiver.
		OFF
DVD/LD	TV	SAT	TV CONT	2 Press the SYSTEM SETUP button.
VCR1/			MULTI
MULTI CONTROL
DVR	VCR2	VIDEO	OPERATION

	CD	CD-R/	TUNER	RECEIVER	1	The menu possibilities appear on your TV.
		TAPE1
	DIMMER	INPUT ATT	LOUDNESS SPEAKER A/B
	1	2	3	4
	VIDEO SEL	SIGNAL SEL	TAPE 2	EFFECT/CH SELL
	5	6	7	8	3	Use the 5∞ and buttons to select
	9	0		ENTER
	TONE	BASS/TREBLE	– +10 + DISC			SURROUND SETUP. Press ENTER.
2	MENU		DIRECT ACCESS DISP MODE
	SYSTEM SETUP			REMOTE SETUP	3~4
	TUNER EDIT
	STATUS	ENTER		EXIT

GUIDE		RETURN
MPX	DTV ON/OFF
¶	8	EXTRA MENU
TUNING –	BAND	TUNING +

1 3 ¡

STATION –	DTV MENU CLASS	STATION +
4	7	¢
CHANNEL–		CHANNEL+

3 System Setup

4Follow the order below to set up your speakers for better sound. Use the 5∞ and 2 3 buttons to navigate through the menus. When you have the setting you want in a particular menu, press

ENTER.

SURROUND

[Auto Surround Setup]

[1. Input Assign ]

[2. Surround Setup ]

[3. Expert Setup ]

[4. THX Audio Setup ]

[Exit]

In each mode, the current settings are displayed. We suggest you adjust all these settings when you first hook up the receiver. That gets them out of the way and you won't need to return to this setting mode unless you change your home set up by adding new speakers (etc.).

SPEAKER SYSTEMS (See p.36-37)

Use to specify the type and number of speakers you connected.

CHANNEL DELAY (See p.38)

You must add distance settings to all your speakers for the most realistic surround sound. Adding a slight delay to some speakers enhances sound separation and is particu- larly important for achieving a surround sound effect. You need to figure out the distance from your listening position to your speakers to add the proper delay.

CHANNEL LEVEL (See p.39-40)

Use to balance the volumes of your different speakers.

ACOUSTIC CALIBRATION (See p.41)

This setting is a kind of room equalizer for your speakers.

SET UP

35