JVC HR-VP650U, HR-VP450U Set Auto Clock To On, Select Host Channel, Select D.S.T. Mode, Semi-Auto

12ENINITIALSETTINGS(cont.)

MENU

CH OK

POWER

1 2 3

2

4 5 6

7 8 9

0 4

1

3 OK

MENU

SHUTTLE PLUS

Semi-Auto

You can change the Host Channel/D.S.T. /Time Zone setting manually.

5		SET AUTO CLOCK TO ON
		At the Clock Set screen,	CLOCK SET
		press OK or SHUTTLE
		PLUS%to move the	TIME	DATE YEAR
			1:00PM	12/24	98 THU
		highlight bar to "AUTO
			AUTO CLOCK : ON
		CLOCK" and press CH 5°	HOST CH	: AUTO	(CATV)
		or SHUTTLE PLUS %Þ to	D.S.T.	: AUTO
		set to "ON".	TIME ZONE	: AUTO
			PRESS (5,°), THEN (OK)
		a– To select the Host
			PRESS (MENU) TO END
		Channel — go to step 6
		b– To select the D.S.T. mode — go to step 7
		c– To select the Time Zone — go to step 8
		NOTE:
		The time that has been set previously will be erased
		when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
		ZONE" setting is changed.
6		SELECT HOST CHANNEL
		You can either select "AUTO" or enter a PBS channel
		number. Move the highlight bar to "HOST CH" by
		pressing OK or SHUTTLE PLUS%, then press CH 5°
	or SHUTTLE PLUS %Þ to set to "AUTO" or the desired
		PBS channel number.
		NOTE:
		There are some PBS channels that do not transmit clock
		setting data.
7		SELECT D.S.T. MODE
		You have three choices:
		a– Select "AUTO" and the adjustment to your VCR's
		clock will be made according to the incoming signal
		from the host channel.
		b– Select "ON" and the adjustment will be made based
		on the clock itself.
		c– Select "OFF" if Daylight Saving Time does not apply
		to you.
		Move the highlight bar to "D.S.T." by pressing OK or
		SHUTTLE PLUS%, then press CH 5° or SHUTTLE
	PLUS %Þ to select the desired mode.

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.