Configuration Commands
With an AT telnet connection, this command will terminate the host data mode and return the Raven to an AT mode. Cannot be accessed in AceManager.
O
Online (Remote): Causes the Raven to go from Command State to data state. Cannot be configured in AceManager.
OPRG=n
Enables/disables over‐the‐air firmware upgrading of the Raven. When Sierra Wireless releases a new version of ALEOS, you can upgrade your remote modems with OPRG enabled.
•n=0 : Disables
•n=1 : Enables
S53=[method][d.d.d.d][/ppppp]
Destination IP address, port, and method. These are used as defaults for the D (Dial) AT command.
•method= P : UDP
•method=T : TCP
•method=N : Telnet
•d.d.d.d=IP address or domain name
•ppppp=the port address
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.
Z
Reset the Raven. In AceManager, this command is performed with the Reset option on the toolbar.
Tip: *DATZ=1 will disable Z.
&W
Writes all changed modem settings. If this command is not issued, any modified values will revert back to their previous values at modem reset. Cannot be configured in AceManager.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 99 |
|
|
|
