Circuit Switch Communications
Figure 2-8: AceManager : Connect to Modem using PPP
6.Configure serial port speed.
a.On the left, under the GROUPS heading, select Serial.
Figure 2-9: AceManager : Serial - *MODEMHISPEED
b.Change the *MODEMHISPEED setting to “0”.
7.Save the serial setting.
a.Click the Write button on the tool bar of AceManager and wait for the message “Write Successful” to appear in the status bar.
Figure 2-10: AceManager : Write
b.Click the Clear button.
Figure 2-11: AceManager : Clear
c.Click the Disconnect button.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 141 |
|
|
|
