Sierra Wireless 20070914 manual Mounting, Light Patterns

Hardware Installation of the Raven

RSSI LED Ranges

RSSI/Signal LED Status	Ranges of RSSI (dBm)
On Solid	Equal to or stronger than -69
Fast Blink	-70 to -79
Normal blink	-80 to -89
Slow Blink	-90 to -99
Extinguished	Equal to or weaker than -100

•TxRx (transmit/receive) ‐ The light will flash as data is transferred to and from the Raven‐E modem on the remote network.

•Pwr (power) ‐ Indicates the power adapter is connected and there is power getting to the Raven.

•The Reset button performs the same function as unplugging power from the modem and plugging it back in. Reset will not alter any saved configuration settings.

Light Patterns

The LEDs on the front of the modem will respond in different patterns to indicate modem states.

•Normal ‐ Each LED, mentioned above, lit as applicable.

•Start up ‐ The LEDs will cycle from left to right.

•PassThru mode ‐ The Chan, Reg, and Link LEDs will blink in tandem. The Tx and Rx LEDs will blink when trans‐ mitting or receiving data.

Mounting

An optional accessory for your Raven is a mounting kit, which includes a bracket. The bracket is designed to snugly cradle the modem and hold it in place where you need it. You can use a strap around the bracket and modem for extra security. The bracket can be attached to a stationary location using #6 screws with the mounting hole diameter approximately 0.150ʺ.

Rev 3.0B Feb.08 34