Activating your Raven on the TELUS Network
Note: You cannot activate with serial and would need USB/net to use set up wizard.
After the Setup Wizard connects to your Raven, the details for your specific model will be displayed. If the incorrect model is displayed, press the Reset Button on your Raven so the Wizard can attempt to connect again. Click Next.
Figure 3-3: Setup Wizard : Connected
3. Selecting Tasks
After the Wizard detects your Raven, you will be offered a menu of Setup tasks. Choose the tasks you need from those displayed.
Note: Some tasks shown in the example here might not be available for your Raven model.
Figure 3-4: Setup Wizard : Task Menu
•Update ALEOS Firmware: Check the Sierra Wireless server for the latest ALEOS firmware.
•Activate Modem: Configure your Raven to connect on the TELUS network.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 21 |
|
|
|
