Sierra Wireless 20070914 Save the configuration settings, Configure the Raven for your equipment

Raven 1x

Figure 2-17: AceManager : PassThru

b.For *PTREFRESH, enter a value of 15.

c.For *RESETPERIOD, enter a value of 6.

10. Save the configuration settings.

Click the Write button on the tool bar of AceManager and wait for the message “Write Successful” to appear in the status bar.

11.Configure the Raven for your equipment.

a.Make any appropriate changes to the serial port parameters to match your equipment. These changes are made under the group Serial.

Caution: Do not under any circumstances change the *MODEMHISPEED setting from the template configuration, the only recommended setting to change is the S23 setting.

b.Follow the directions above to Write the changes to the modem.

12.Reset the Raven.

a.Click the Disconnect button.

b.Press the modem Reset button on the front of the modem.

c.Wait until the modem REG indicator is lit.

d.Disconnect the Raven from your computer.

13.Test the Raven Configuration.

Once the modem has been activated and you’ve built the command string it is recommended that the Raven modem be tested previous to field installation.

144 20070914